Order Products : sales@su-jiao.com

INSPIRE™ 137 (Blow Molding Extrusion)

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Braskem Europe GmbH
Trademark:	INSPIRE™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SCLeWM_INSPIRE-137-Blow-Molding-Extrusion-.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
INSPIRE™ 137 Performance Polymer is an impact copolymer, primarily designed for film extrusion and suitable for blow moulding where high mechanical properties are of the highest importance. INSPIRE 137 Performance Polymer is a high molecular weight, high impact copolymer with a broad molecular weight distribution. Applications for INSPIRE 137 Performance Polymer: Film Sheet and boards Adhesive tape Paper lamination Extrusion profiles and pipes Drainage and sewage pipes Blow moulded containers: detergents toiletries foodstuffs Complies with: US FDA FCN 843 European Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

Message

INSPIRE™ 137 Performance Polymer is an impact copolymer, primarily designed for film extrusion and suitable for blow moulding where high mechanical properties are of the highest importance.

INSPIRE 137 Performance Polymer is a high molecular weight, high impact copolymer with a broad molecular weight distribution.

Applications for INSPIRE 137 Performance Polymer:

Film

Sheet and boards

Adhesive tape

Paper lamination

Extrusion profiles and pipes

Drainage and sewage pipes

Blow moulded containers:

detergents

toiletries

foodstuffs

Complies with:

US FDA FCN 843

European Commission Regulation (EU) No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	EU No 10/2011 FDA FCN 843
Forms	Pellets
Processing Method	Blown Film

Physical	Nominal Value	Unit	Test Method
Density	0.900	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	0.80	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Stress (Yield, Injection Molded)	24.0	MPa	ISO 527-2
Tensile Strain (Yield, Injection Molded)	15	%	ISO 527-2
Flexural Modulus (Injection Molded)	1000	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-20°C, Injection Molded	8.0	kJ/m²
0°C, Injection Molded	12	kJ/m²
23°C, Injection Molded	55	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature (0.45 MPa, Unannealed)	85.0	°C	ISO 75-2/B
Vicat Softening Temperature	146	°C	ISO 306/A

Resin Grade	Manufacturer	Category	Trademark
RTP 200 AR 5	RTP Company	Nylon 66	RTP
Radilon® A RV500 100 NAT	Radici Plastics	Nylon 66	Radilon®
Scolefin 24 T 20-0	Ravago Group	PP Copolymer	Scolefin
BESTPOLUX PCX-02	Triesa Plastics	PC	BESTPOLUX
KumhoSunny ABS ER872	Shanghai KumhoSunny Plastics Co., Ltd.	ABS	KumhoSunny ABS