Order Products : sales@su-jiao.com
RTP 200.5 TFE 20
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S8exn1_RTP-200-5-TFE-20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.70 | % | |
| 6.35 mm, Injection Molded | 1.1 | % | |
| Water Absorption (23°C, 24 hr) | 0.85 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 4130 | MPa | ASTM D638 |
| Tensile Strength | 90.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 3.8 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 3790 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 131 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 43 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 370 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 227 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 204 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 274 to 293 | °C | |
| Middle Temperature | 274 to 293 | °C | |
| Front Temperature | 274 to 293 | °C | |
| Mold Temperature | 66.0 to 107 | °C | |
| Injection Pressure | 83.0 to 124 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Westlake LDPE EC800AA | Westlake Chemical Corporation | LDPE | Westlake LDPE |
| Fainplast PVC CKL 0173 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| O'Tech OW 939 PLTC | O'Tech Corporation | PVC, Unspecified | O'Tech |
| Plaslube® PEEK TL15 A | Techmer Engineered Solutions | PEEK | Plaslube® |
| SD POLYCA™ IM-401-28 | Sumika Styron Polycarbonate Limited | PC | SD POLYCA™ |
