Order Products : sales@su-jiao.com
EMAREX® 400 GF33
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | MRC Polymers, Inc. |
| Trademark: | EMAREX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | S15u9E_EMAREX-400-GF33.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EMAREX® 400 GF33 is a Polyamide 66 (Nylon 66) material filled with 33% glass fiber. It is available in North America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.39 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.30 | % | ASTM D955 |
| Water Absorption (Equilibrium) | 1.0 | % | ASTM D570 |
| Relative Viscosity | 50 | mPa·s | ASTM D789 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Reinforcement Content | 30 to 36 | % | ASTM D2584 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 101 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 145 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 2.0 | % | ASTM D638 |
| Flexural Modulus | 8270 | MPa | ASTM D790 |
| Flexural Strength | 214 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 69 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 244 | °C | |
| 1.8 MPa, Unannealed | 232 | °C | |
| Melting Temperature | 265 | °C | ASTM D789 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mapex AN0920SN | Ginar Technology Co., LTD. | Nylon 6 | Mapex |
| Ryton® R-7-120BL | Solvay Specialty Polymers | PPS | Ryton® |
| Silplus® 40 MP | Momentive Performance Materials Inc. | Silicone Rubber, HTV | Silplus® |
| Formolene® E922 | Formosa Plastics Corporation, U.S.A. | HDPE, MMW | Formolene® |
| Braskem PP C155-02 | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
