Order Products : sales@su-jiao.com

NuSil MED-6382

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Ryucko_NuSil-MED-6382.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties. LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold. Comments: FAST CURE, OPAQUE

Message

NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications.

Low consistency elastomers (LCEs) are useful alternatives to liquid silicone rubber (LSR) and high consistency rubber (HCR) for end users who need a low viscosity elastomer which provides other unique properties.

LCEs lend themselves to applications that require a pourable, self-leveling silicone. Applications include: encapsulating a device, backfilling a void, potting an electronic component that cannot withstand exposure to high heat, or prototyping a mold.

Comments: FAST CURE, OPAQUE

General Information
Features	Fast Cure Good Processability Low Viscosity
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Appearance	Opaque
Processing Method	Encapsulating Potting

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Tin-Alkoxy

Uncured Properties	Nominal Value	Unit
Density	1.13	g/cm³
Viscosity	40	Pa·s
Curing Time (23°C)	24	hr
Pot Life (25°C)	7.0	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	45
Tensile Strength	3.45	MPa
Tensile Elongation at Break	100	%

Resin Grade	Manufacturer	Category	Trademark
BESTNYL SE00VI02AH	Triesa Plastics	Nylon 66	BESTNYL
Capran Medallion® 2500 film	Honeywell	Nylon 6	Capran Medallion®
Daelim Po1y® LH-144	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Electrafil® PC/ABS	Techmer Engineered Solutions	PC+ABS	Electrafil®
Kepamid® 2350GB	Korea Engineering Plastics Co., Ltd	Nylon 66	Kepamid®