Order Products : sales@su-jiao.com

ALKAMIX™ MB-6006

Category:	Fluoropolymer , Fluoropolymer
Manufacturer:	Marplex Australia Pty. Ltd.
Trademark:	ALKAMIX™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RxZIpM_ALKAMIX-MB-6006.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
ALKAMIX™ MB-6006 is a processing aid masterbatch based on a fluoropolymer compound at a concentration of 5 percent. ALKAMIX™ MB-6006 can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture ("Sharkskin") type extrusion defects. The level required will vary according to extrusion equipment and type of LLDPE being used, however the recommended addition level is between 1 and 2 percent. ALKAMIX MB6006 is compatible with the process aid used in "Alkatuff" film polymers. The maximum level of addition of ALKAMIX™MB-6006 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

Message

ALKAMIX™ MB-6006 is a processing aid masterbatch based on a fluoropolymer compound at a concentration of 5 percent.

ALKAMIX™ MB-6006 can be added to linear low density polyethylene (LLDPE) during extrusion to eliminate melt fracture ("Sharkskin") type extrusion defects. The level required will vary according to extrusion equipment and type of LLDPE being used, however the recommended addition level is between 1 and 2 percent. ALKAMIX MB6006 is compatible with the process aid used in "Alkatuff" film polymers.

The maximum level of addition of ALKAMIX™MB-6006 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.

General Information
Additive	Processing Aid (5%)
Uses	Masterbatch

Physical	Nominal Value	Unit	Test Method
Density	0.935	g/cm³	ASTM D1505

Injection	Nominal Value	Unit
Processing (Melt) Temp	< 200	°C

Resin Grade	Manufacturer	Category	Trademark
Rhelon X1000L-01	RheTech, Inc.	Nylon 6	Rhelon
SCHULAMID® XT 200 GF 50 NATURAL	A. Schulman Europe	Nylon 66	SCHULAMID®
APEX® 96-A0097D4-85	Teknor Apex Company	PVC, Flexible	APEX®
Deprene 201-55	Shanghai Lin Gen Rubber Materials Co., Ltd.	PP+EPDM	Deprene
Sarlink® TPE ME-2380-01 BLK 111	Teknor Apex Company	TPE	Sarlink® TPE