Order Products : sales@su-jiao.com
Stat-Tech™ NN-20GF-15MCF/000 HS
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Stat-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RowuZd_Stat-Tech-NN-20GF-15MCF-000-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stat-Tech™ Electrically Conductive Compounds are specifically engineered to provide anti-static, ESD and RFI/EMI shielding performance for critical electronic equipment applications. These compounds combine the performance of select engineering resins with reinforcing additives such as carbon powder, carbon fiber, nickel-coated carbon fiber and stainless steel fiber for low to high levels of conductivity depending upon application requirements. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1(23°C) | 1.37 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow 2(23°C, 4.00 mm) | 0.10 to 0.40 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C, 4.00 mm, Injection Molded) | 15500 | MPa | ISO 527-2/1 |
| Tensile Stress (Break, 23°C, 4.00 mm, Injection Molded) | 185 | MPa | ISO 527-2/5 |
| Tensile Strain (Break, 23°C, 4.00 mm, Injection Molded) | > 1.5 | % | ISO 527-2/5 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C, Injection Molded) | 7.5 to 9.0 | kJ/m² | ISO 179 |
| Charpy Unnotched Impact Strength (23°C, Injection Molded) | 46 to 55 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 261 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 250 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+2 to 1.0E+4 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+2 to 1.0E+4 | ohms·cm | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glow Wire Flammability Index (0.800 to 3.00 mm) | 650 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 280 to 300 | °C |
| Note Message | |
|---|---|
| 1 . | ±0.03 |
| 2 . | Bergmann method |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Resinoid 2018 | Resinoid Engineering Corporation | Phenolic | Resinoid |
| Royalene® 556 | Lion Copolymer, LLC | EPDM | Royalene® |
| CarmelStat™ CS 5015 | Carmel Olefins Ltd. | PP, Unspecified | CarmelStat™ |
| Daelim Po1y® 6007LD | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| PLUSTEK PA810 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
