Order Products : sales@su-jiao.com

Ultra Low Outgassing™ SCV1-2599

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	Ultra Low Outgassing™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Romnl8_Ultra-Low-Outgassing-SCV1-2599.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Thermally Conductive, 1.60 W/m-K

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Thermally Conductive, 1.60 W/m-K

General Information
Features	Low to No Outgassing Thermally Conductive
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit	Test Method
CLTE - Flow	2.3E-4	cm/cm/°C
Thermal Conductivity	1.6	W/m/K	ASTM E1530

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 15
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	White
Density	1.53	g/cm³
Curing Time (23°C)	1.7E+2	hr
Pot Life	120	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	75
Tensile Strength	1.38	MPa
Tensile Elongation at Break	30	%
Electric Strength	21	kV/mm

Resin Grade	Manufacturer	Category	Trademark
Starex GA-4025	SAMSUNG SDI CO., LTD.	ABS	Starex
Topilene® J642	Hyosung Corporation	PP Impact Copolymer	Topilene®
AVP™ RLL10CP	SABIC Innovative Plastics	PC	AVP™
LONOY lonoy 1200	Kingfa	PC+PBT	LONOY
PROTEQ™ C12UT2	Marplex Australia Pty. Ltd.	PP Copolymer	PROTEQ™