Order Products : sales@su-jiao.com
Jam PE 30505
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Jam Petrochemical Company |
| Trademark: | Jam PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RklGGu_Jam-PE-30505.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Jam PE 30505 is a Linear Low Density Polyethylene product. It can be processed by rotational molding and is available in Africa & Middle East. |
| General Information | |
|---|---|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.930 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 16.3 | MPa | |
| Break, Compression Molded | 14.0 | MPa | |
| Tensile Elongation (Break, Compression Molded) | > 800 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 550 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | No Break | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 104 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PRL PC-GP1-D | Polymer Resources Ltd. | PC | PRL |
| SEPAZ™ 240A | Mando Advanced Materials Co., Ltd. | PPA | SEPAZ™ |
| Anjacom® 350-H/GF30 | Almaak International GmbH | Nylon 66 | Anjacom® |
| Diakon® ST25N8 | Lucite International Inc. | Acrylic (PMMA) | Diakon® |
| En Chuan 332 | En Chuan Chemical Industries Co,. Ltd. | PS (GPPS) | En Chuan |
