Order Products : sales@su-jiao.com

KRATON® G1640 E

Category:	SEBS , Styrene Ethylene Butylene Styrene Block Copolymer
Manufacturer:	Kraton Polymers LLC
Trademark:	KRATON®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RiGaD3_KRATON-G1640-E.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Kraton G1640 E is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass. It is supplied from Europe as identified in the grade nomenclature below. Kraton G1640 ES - supplied as a "fluffy" crumb dusted with amorphous silica Kraton G1640 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the midblock suggests the use of this grade in applications that must withstand weathering and high processing termperatures. In addition G1640 E offers the advantages of a high molecular weight polymer at lower melt viscosities.

Message

Kraton G1640 E is a clear linear triblock copolymer based on styrene and ethylene/butylene (S-E/B-S) with bound styrene of 32.9% mass. It is supplied from Europe as identified in the grade nomenclature below.

Kraton G1640 ES - supplied as a "fluffy" crumb dusted with amorphous silica

Kraton G1640 E is used as a base material for compound formulations and as a modifier of thermoplastics. The inherent stability of the midblock suggests the use of this grade in applications that must withstand weathering and high processing termperatures. In addition G1640 E offers the advantages of a high molecular weight polymer at lower melt viscosities.

General Information
Additive	Antioxidant (300 ppm)
Features	Antioxidant
Uses	Compounding Plastics Modification
Appearance	Clear/Transparent
Forms	Crumb

Physical	Nominal Value	Unit	Test Method
Density	0.908	g/cm³	ISO 2781
Apparent Density	0.19	g/cm³	ASTM D1895
Solution Viscosity ¹	1500	mPa·s	Internal Method
Bound Styrene	30.7 to 32.7	%	Internal Method
Ash Content	0.7 to 1.1	wt%	ISO 247
Total Extractables	< 1.6	wt%	Internal Method
Volatile Matter	< 0.50	wt%	Internal Method

Note Message
1 .	Measured on 15% m/m solution in toluene at 25°C using a Brookfield viscometer LVT model

Resin Grade	Manufacturer	Category	Trademark
Sinvicomp SRF9721G	Teknor Apex Asia Pacific PTE. LTD.	PVC, Rigid	Sinvicomp
Sylvin 2944-91 Clear	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
VESTAMID® L L-R7-MHI	Evonik Industries AG	Nylon 12	VESTAMID® L
Ultramid® 8333G HI	BASF Corporation	Nylon 6	Ultramid®
LNP™ THERMOCOMP™ SF004S compound	SABIC Innovative Plastics	Nylon 12	LNP™ THERMOCOMP™