Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroplastic ET 6235Z

Category:	ETFE , Ethylene Tetrafluoroethylene Copolymer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroplastic
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Rfeo17_3M-Dyneon-Fluoroplastic-ET-6235Z.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroplastic ET 6235Z is a melt processable fluoroplastic resin, consisting mainly of alternating tetrafluoroethylene und ethylene monomer units (ETFE).

Features

Wide service temperature range from -200 °C to +150 °C

Low flammability

Excellent electrical and mechanical properties

Very good resistance to solvents and chemicals

Extremely high resistance to outdoor weathering

High light transmission in the visible and UV ranges

Non-stick characteristics

Excellent tear and tear propagation resistance

Low permeability

Good resistance to radiation

General Information
Features	Copolymer Good Chemical Resistance Good Electrical Properties Good Tear Strength Good Weather Resistance Non-Stick Radiation (Gamma) Resistant Solvent Resistant
UL File Number	E188957
Forms	Pellets
Processing Method	Blow Molding Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.73	g/cm³	ISO 12086
Melt Mass-Flow Rate (MFR) (297°C/5.0 kg)	10	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	1200	MPa	ISO 527-1
Tensile Stress (Break, 23°C)	49.0	MPa	ISO 527-1
Tensile Strain (Break, 23°C)	480	%	ISO 527-1

Thermal	Nominal Value	Unit	Test Method
Melting Temperature	266	°C	ASTM D4591
Maximum Service Temperature	150	°C	DIN 57207

Flammability	Nominal Value	Unit	Test Method
Flame Resistance (110.0 µm)	Building Material Class B1		DIN 4102

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength	59	kV/mm	ASTM D149
Dielectric Constant (1 MHz)	2.58		ASTM D150

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm, measured on compression molded plaques)	V-0		UL 94
Oxygen Index	35	%	ASTM D2863

Optical	Nominal Value	Unit
Refractive Index ¹	1.400
Transmittance (100 µm, 600 nm)	87.0	%

Injection	Nominal Value	Unit
Processing (Melt) Temp	300 to 340	°C

Note Message
1 .	100 micron film

Resin Grade	Manufacturer	Category	Trademark
Maxiglas® MG820	Maxiglas Corporation	Acrylic (PMMA)	Maxiglas®
Premi-Glas® 3101-25	Premix, Inc.	TS, Unspecified	Premi-Glas®
SILVER® SA-5304	Guangdong Silver Age Sci & Tech. Co., Ltd	Polyolefin, Unspecified	SILVER®
Spartech Polycom PGR2446	Spartech Polycom	PP Homopolymer	Spartech
Topolymer® 5111-901E	Dongguan Top Polymer Enterprise	TPE	Topolymer®