Order Products : sales@su-jiao.com
UNISOFT TPE™ ST-43A-CL-1-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT TPE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Re5Bh9_UNISOFT-TPE-ST-43A-CL-1-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.890 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 3.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 43 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 5.90 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 700 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 160 to 180 | °C | |
| Front Temperature | 160 to 180 | °C | |
| Nozzle Temperature | 200 to 215 | °C | |
| Mold Temperature | 30.0 to 65.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx 55S5202 | The Matrixx Group, Inc. | PC | Matrixx |
| PRIMALENE WPP732 | Southern Polymer, Inc. | HDPE | PRIMALENE |
| Ebalta MG 321 FR / Comp. A+B | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| KPOL-PP K-PPC 3.5 | KPOL Chem Co. | PP Impact Copolymer | KPOL-PP |
| Pebax® 4033 SA 01 MED | Arkema | PEBA-Ether | Pebax® |
