Order Products : sales@su-jiao.com
Chemical Resources HD3954ST
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chemical Resources, Inc. |
| Trademark: | Chemical Resources |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RddByT_Chemical-Resources-HD3954ST.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HD3954ST is a lubricated high density polyethylene resin suitable for Blow Molding. It meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.954 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.38 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Flexural Modulus | 1210 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 127 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Akulon® K224-G4U | DSM Engineering Plastics | Nylon 6 | Akulon® |
| BorShape™ FX1001 | Borealis AG | LPE Terpolymer | BorShape™ |
| Braskem PE GM9450F | Braskem | HDPE | Braskem PE |
| Generic TS, Unspecified - Glass Fiber | Generic | TS, Unspecified | Generic |
| Lucky Enpla LHLD1015 | Lucky Enpla Co LTD | PC | Lucky Enpla |
