Order Products : sales@su-jiao.com
Hanwha Total TPE SE65
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | HANWHA TOTAL PETROCHEMICALS Co., Ltd. |
| Trademark: | Hanwha Total TPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RbdYQZ_Hanwha-Total-TPE-SE65.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SE65 Thermoplastic Elastomer is a dynamically fully cured thermoplastic elastomer. There is no vulcanization, and this is shipped pre-mixed an ready to process. This can be processed on extrusion,injection and blow molding equipment for faster molding cycle times and lower per-part costs. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 65 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Break) | 6.08 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 300 | % | ASTM D412 |
| Tear Strength | 24.5 | kN/m | ASTM D624 |
| Compression Set (25°C, 70 hr) | 30 | % | ASTM D395 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 190 | °C | |
| Middle Temperature | 180 to 190 | °C | |
| Front Temperature | 180 to 190 | °C | |
| Processing (Melt) Temp | 200 | °C | |
| Mold Temperature | 30.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 to 180 | °C | |
| Cylinder Zone 2 Temp. | 180 to 190 | °C | |
| Cylinder Zone 3 Temp. | 180 to 190 | °C | |
| Adapter Temperature | 190 to 200 | °C | |
| Die Temperature | 200 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARPOL® COPP 10.NB | Marco Polo International, Inc. | PP Copolymer | MARPOL® COPP |
| RAMTAL PM1003 | Polyram Ram-On Industries | Acetal (POM) Copolymer | RAMTAL |
| SCANAMID 6 B12^ F30 | Polykemi AB | Nylon 6 | SCANAMID 6 |
| ACCUTECH™ HP0335G30CV | ACLO Compounders Inc. | PP Homopolymer | ACCUTECH™ |
| EPO-TEK® EE149-6 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
