Order Products : sales@su-jiao.com
RTP 1199 X 115085 D
| Category: | PETG , Polyethylene Terephthalate Glycol Comonomer |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RZf502_RTP-1199-X-115085-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Carbon Nanotube - ESD Protection |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.20 - 0.40 | % | ASTM D955 |
| Moisture Content | 0.020 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Static Decay | sec | FTMS 101C 4046.1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2480 | MPa | ASTM D638 |
| Tensile Strength | 49.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 7.0 | % | ASTM D638 |
| Flexural Modulus | 2690 | MPa | ASTM D790 |
| Flexural Strength | 86.9 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.20 mm) | 27 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.20 mm) | 370 | J/m | ASTM D4812 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | |||
| -- | 1.0E+5 - 1.0E+7 | ohms | ASTM D257 |
| -- | 1.0E+4 - 1.0E+6 | ohms | ESD STM11.11 |
| Volume Resistivity | 1.0E+2 - 1.0E+4 | ohms·cm | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Dew Point | -33.9 | °C |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 4.0 | hr | |
| Melt Temperature | 249 - 293 | °C | |
| Die Temperature | 249 - 293 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PONACOM PS 5470 | Ponachem Compound GmbH | PS (HIPS) | PONACOM PS |
| TEKAMID™ TA250GM40 | Mando Advanced Materials Co., Ltd. | Nylon 66 | TEKAMID™ |
| Utomer UT860D | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| Hanwha Total PP NH54I | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | PP, High Crystal | Hanwha Total PP |
| NYLOY® MS-0200B-3-H | Nytex Composites Co., Ltd. | Nylon 66 | NYLOY® |
