Category: | PVC, Unspecified , Polyvinyl Chloride |
Manufacturer: | S&E Specialty Polymers, LLC |
Trademark: | S&E PVC |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | RZ3xQU_S-E-PVC-GA-1180.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
S & E PVC GA-1180 is a polyvinyl chloride product,. It is available in North America. Typical application areas are: wire and cable. |
General Information | |
---|---|
Uses |
|
Appearance |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
Hardness | Nominal Value | Unit | Test Method |
---|---|---|---|
Durometer Hardness | ASTM D2240 | ||
Shaw A | 85 | ASTM D2240 | |
Shaw A, 15 seconds | 80 | ASTM D2240 |
Elastomers | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (100% Strain) | 9.65 | MPa | ASTM D412 |
Tensile Strength (Yield) | 15.9 | MPa | ASTM D412 |
Tensile Elongation (Break) | 350 | % | ASTM D412 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Brittleness Temperature | -28.0 | °C | ASTM D746 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Volume Resistivity | 8.9E+12 | ohms·cm | ASTM D257 |
Flammability | Nominal Value | Unit | Test Method |
---|---|---|---|
Oxygen Index | 23 | % | ASTM D2863 |
Additional Information |
---|
Suggested Stock Temperature: 360°FTemperature Rating: 105°CMin. Wall Thickness: 0.03 inches |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Terblend® N NM-11 | INEOS Styrolution Group GmbH | ABS+Nylon | Terblend® N |
Wellamid® 22LHI4 XE-GY1 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
NEXT PCR PA6 G33-300PCR | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT PCR |
Cleapact TS-50 | DIC Corporation | SBC | Cleapact |
ELASTOSIL® 9000 N | Wacker Chemie AG | Silicone | ELASTOSIL® |