Order Products : sales@su-jiao.com
Halene H M5002L
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RUUm8B_Halene-H-M5002L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M5002L is a Narrow MWD HDPE produced by the Spherilene Technology. M5002L is suited for injection molding of Caps and Closure application. The precise control of morphology & MWD during polymerization confers superior processability and improved performance properties compared to conventional HDPE grades. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.950 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield, Injection Molded | 25.0 | MPa | |
| Break, Injection Molded | 39.0 | MPa | |
| Tensile Elongation 2(Break, Injection Molded) | > 1000 | % | ASTM D638 |
| Flexural Modulus | 973 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 180 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 78.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 125 | °C | ASTM D1525 3 |
| Peak Melting Temperature | 131 | °C | ASTM D3418 |
| Note Message | |
|---|---|
| 1 . | Type IV |
| 2 . | Type IV |
| 3 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultralloy™ 806 | Hapco Inc. | TP, Unspecified | Ultralloy™ |
| ALCOM® PC 740/4 UV CC1321-08LG | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| CoolPoly® D3608 | Cool Polymers, Inc. | Nylon 46 | CoolPoly® |
| DINALON® B1S25 G30-0008 | Grupo Repol | Nylon 6 | DINALON® |
| Gallonprene® GP100-8501 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
