Order Products : sales@su-jiao.com
Epoxies, Ect. 10-3713
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxies, Etc. |
| Trademark: | Epoxies, Ect. |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RTDW1l_Epoxies-Ect-10-3713.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
10-3713 is used as a two component ultra clear epoxy adhesive designed for a variety of bonding applications. 10-3713 forms a crystal clear bond line and is formulated with proprietary ultraviolet protectors to minimize yellowing of the cured epoxy. This adhesive when UV aged in a QUV Weatherometer outperforms other commercially available adhesives. Any excess adhesive or visible bond lines are less noticeable due to the adhesives outstanding clarity. 10-3713 is low in viscosity and therefore offers maximum wetting and penetration of substrates. Tenacious bonds are formed at room temperature or with mild heat. 10-3713 should be used anywhere a clear, strong bond is required. Features:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 5.0E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.42 | W/m/K |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Operating Temperature | -50.0 to 150 | °C |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Color | Clear/Transparent | ||
| Mix Ratio by Weight (PBW) | |||
| Part A | 2.0 | ||
| Part B | 1.0 | ||
| Density (25°C) | 1.11 | g/cm³ | |
| Viscosity 1(25°C) | 0.65 | Pa·s | |
| Curing Time | |||
| 55°C | 0.12 | hr | |
| 45°C | 0.33 | hr | |
| 35°C | 1.5 | hr | |
| 30°C | 3.5 | hr | |
| 25°C | 24 | hr | |
| Pot Life (25°C) | 45 | min |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 80 | ||
| Tensile Strength | 64.8 | MPa | |
| Electric Strength | 22 | kV/mm | |
| Volume Resistivity | 5.0E+15 | ohms·cm |
| Note Message | |
|---|---|
| 1 . | Mixed |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2404H4 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| Sindustris PBT SG3251A | Sincerity Australia Pty Ltd. | PBT+PET | Sindustris PBT |
| AMTOPP BA50 | Inteplast Group | PP, Unspecified | AMTOPP |
| FHR EPS 40-S7640 | Flint Hills Resources, LP | PS (EPS) | FHR EPS |
| Sylvin 8290-65 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
