Order Products : sales@su-jiao.com
SABIC® LLDPE 324CE
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Saudi Basic Industries Corporation (SABIC) |
| Trademark: | SABIC® LLDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RNRGqA_SABIC-LLDPE-324CE.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
SABIC® LLDPE 324CE is a Linear Low Density Polyethylene natural resin typically used for wire and cable applications. SABIC® LLDPE 324CE contains a low level of antioxidants and does not contain any antiblock and/or slip agents. It also exhibits good Environmental Stress Crack Resistance (ESCR). Sufficient Cu-inhibitor should be added to meet specific ageing requirements. For jacketing applications, addition of Carbon Black or UV stabilizer is required. Applications
This product is not intended for and must not be used in any pharmaceutical/medical applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.6 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Compression Molded) | 53 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-2 | ||
| Yield, Compression Molded | 13.0 | MPa | |
| Break, Compression Molded | 22.0 | MPa | |
| Tensile Strain | ISO 527-2 | ||
| Yield, Compression Molded | 21 | % | |
| Break, Compression Molded | 1900 | % | |
| Flexural Modulus (Compression Molded) | 500 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 123 | °C | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 8.5E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength 1 | > 30 | kV/mm | ASTM D149 |
| Dielectric Constant (60 Hz) | 2.20 | ASTM D150 | |
| Dissipation Factor (60 Hz) | 5.0E-4 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 2000 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2200 LF | RTP Company | PEEK | RTP |
| SITRALON 18E-UV / C3020 rot | SITRAPLAS GmbH | PC | SITRALON |
| SLOVAMID® 66 GB 20 LS | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Zythane® 4060D | Alliance Polymers & Services | TPU-Polyester | Zythane® |
| Clyrell RC354N | LyondellBasell Industries | PP Random Copolymer | Clyrell |
