Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic THV 815GZ
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RLVKvc_3M-Dyneon-Fluoroplastic-THV-815GZ.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Dyneon™ THV 815G Z Fluorothermoplastic provides a balance of low permeation, thermal stability and melt processability. It can be used to prepare molded parts and extruded film, tubes, profiles and wire coatings. It is useful for applications that require flexibility and good chemical resistance. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.06 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 29.0 | MPa | ISO 527-1 |
| Tensile Strain (Break) | 430 | % | ISO 527-1 |
| Flexural Modulus | 525 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 225 | °C | ISO 12086 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 270 to 290 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 270 to 290 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Trexprene® A40CW | Mitsubishi Chemical Performance Polymers, Inc. | TPV | Trexprene® |
| ASPUN™ 6850A | The Dow Chemical Company | LLDPE | ASPUN™ |
| LNP™ FARADEX™ NX07344 compound | SABIC Innovative Plastics Asia Pacific | PC+ABS | LNP™ FARADEX™ |
| Plenco 06527 (Injection) | Plastics Engineering Co. | Phenolic | Plenco |
| Dow Corning® C6-540 | Dow Corning Corporation | Silicone | Dow Corning® |
