Order Products : sales@su-jiao.com
Cosmic Alkyd 3D36
| Category: | Alkyd , Alkyd |
| Manufacturer: | Cosmic Plastics, Inc. |
| Trademark: | Cosmic Alkyd |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RHC6gb_Cosmic-Alkyd-3D36.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DESCRIPTION Cosmic 3D36 is a long glass fiber filled, impact resistant and flame retardant alkyd molding compound which is supplied in a flake form. It molds easily in standard compression or transfer equipment and has a shelf life of one year when stored at 10 0 C or below. FEATURES 3D36 cures rapidly to give high strength parts with excellent surface, good electrical insulation and dimensional stability. APPLICATIONS Used in circuit breakers, relays, coil bobbins, terminal boards and connectors. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.95 | g/cm³ | |
| Bulk Factor | 6.0 to 12 | ||
| Molding Shrinkage - Flow | 0.10 to 0.40 | % | |
| Dimensional Stability | < 0.040 | % | |
| Water Absorption 1(Equilibrium, 50°C) | 0.25 | % |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 24.1 to 48.3 | MPa | |
| Flexural Strength | 82.7 to 96.5 | MPa | |
| Compressive Strength | 124 to 152 | MPa |
| Impact | Nominal Value | Unit | |
|---|---|---|---|
| Notched Izod Impact | 160 to 320 | J/m |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Heat Distortion | 205 | °C |
| Electrical | Nominal Value | Unit | |
|---|---|---|---|
| Dielectric Breakdown | |||
| Dry | 55000 | V | |
| Wet | 40000 | V | |
| Dielectric Strength 2 | |||
| Dry | 16 | kV/mm | |
| Wet | 14 | kV/mm | |
| Dielectric Constant | |||
| 1 kHz 3 | 6.00 | ||
| 1 kHz 4 | 5.50 | ||
| 1 MHz 5 | 5.50 | ||
| 1 MHz 6 | 5.60 | ||
| Dissipation Factor | |||
| 1 kHz 7 | 0.050 | ||
| 1 kHz 8 | 0.040 | ||
| 1 MHz 9 | 0.030 | ||
| 1 MHz 10 | 0.025 | ||
| Arc Resistance | 140 | sec |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 130 to 170 | °C | |
| Injection Pressure | 3.45 to 55.2 | MPa |
| Note Message | |
|---|---|
| 1 . | 48 hrs |
| 2 . | Method B (Step-by-Step) |
| 3 . | Wet |
| 4 . | Dry |
| 5 . | Wet |
| 6 . | Dry |
| 7 . | Wet |
| 8 . | Dry |
| 9 . | Wet |
| 10 . | Dry |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 1385 C | RTP Company | PPS | RTP |
| SABIC® HDPE P5510 | SABIC Americas, Inc. | HDPE | SABIC® HDPE |
| Quadraflex™ ARE-75A | Biomerics, LLC | TPU-Polyether | Quadraflex™ |
| Colorite 88 Series 9588 | Colorite Polymers | PVC, Unspecified | Colorite 88 Series |
| Devcon Combo Wear FC | Devcon | Epoxy | Devcon |
