Order Products : sales@su-jiao.com
Witcom PES BG
| Category: | PESU , Polyethersulfone |
| Manufacturer: | Witcom Engineering Plastics B.V. |
| Trademark: | Witcom PES |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RH5V62_Witcom-PES-BG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Bearing grade |
| General Information | |
|---|---|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.52 | g/cm³ | ISO 1183 |
| Molding Shrinkage - Flow (3.00 mm) | 0.20 - 0.40 | % | ISO 2577 |
| Water Absorption | ISO 62 | ||
| Saturated, 23°C | 1.6 | % | ISO 62 |
| Equilibrium, 23°C, 50% RH | 0.50 | % | ISO 62 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | < 110 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 1.0 - 3.0 | % | ISO 527-2 |
| Flexural Modulus | 7000 | MPa | ISO 178 |
| Flexural Stress | 140 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 5.5 | kJ/m² | ISO 180/1A |
| Unnotched Izod Impact Strength | 16 | kJ/m² | ISO 180/1U |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 210 | °C | ISO 75-2/A |
| CLTE - Flow | 2.4E-5 | cm/cm/°C | ISO 11359-2 |
| RTI Imp (3.00 mm) | 180 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+4 - 1.0E+6 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (3.00 mm) | V-0 | ISO 1210 | |
| Glow Wire Flammability Index (1.60 mm) | 960 | °C | IEC 60695-2-12 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 130 - 160 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Processing (Melt) Temp | 350 - 390 | °C | |
| Mold Temperature | 150 - 190 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.00 - 1.00 | MPa |
| Injection instructions |
|---|
| Screw speed: 0.1 - 0.2 m/sInjection pressure: Keep to a minimumHold pressure: Keep to a minimum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rotec® ABS 1001 FR V0/5 | ROMIRA GmbH | ABS | Rotec® ABS |
| TAROPRENE® 1 A60 M1M | Taro Plast S.p.A. | TPV | TAROPRENE® |
| DENKA EVA TEX 59 | Denka Company Limited | EVA | DENKA EVA TEX |
| INLUBE PA6GF30TF13SI2 | Infinity LTL Engineered Compounds | Nylon 6 | INLUBE |
| TECHNYL® A 218 S30 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
