Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-7022U
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RGuuHd_Shin-Etsu-Elastomer-KE-7022U.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
KE-7022 U is intended for applications where excellent high heat resistance is required.
Typical Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.29 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 62 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 8.41 | MPa | |
| Tensile Elongation (Break) | 280 | % | |
| Tear Strength 1 | 11.4 | kN/m | |
| Compression Set (180°C, 22 hr) | 7.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time (200°C) | 4.0 | hr |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure Agent | DBPH | ||
| Press / Post Cure: Post |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEKANATE™ G7013FR | Mando Advanced Materials Co., Ltd. | PC | TEKANATE™ |
| Formolene® LH5320 | Formosa Plastics Corporation, U.S.A. | HDPE | Formolene® |
| HOPELEX AF-3100 | Lotte Chemical Corporation | PC+ABS | HOPELEX |
| INSULCAST® 101 | ITW Polymers Coatings North America | Epoxy | INSULCAST® |
| Sylvin 83039-74 Brown 7462 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
