Order Products : sales@su-jiao.com
Plavis® S
| Category: | PI, TP , Thermoplastic Polyimide |
| Manufacturer: | Comco Nylon GmbH |
| Trademark: | Plavis® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RFv4La_PlavisS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PLAVIS is a super engineering plastic. PLAVIS polyimide has a unique chemical structure with some of the highest properties availiable. Nitrogen bonded to 3 carbons is the critical part of the chain and imparts the plastic with remarkable features and benefits. DAELIM makes PLAVIS isostatic molded rods have uniform properties in all directions. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.45 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale, Compression Molded) | 100 - 120 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D1708 | ||
| Fracture, 23°C | 164 | MPa | ASTM D1708 |
| Fracture, 260°C | 64.0 | MPa | ASTM D1708 |
| Tensile Elongation 2 | ASTM D1708 | ||
| Fracture, 23°C | 8.0 | % | ASTM D1708 |
| Fracture, 260°C | 40 | % | ASTM D1708 |
| Compressive Strength 3(10% Strain, 23°C) | 210 | MPa | ASTM D695 |
| Coefficient of Friction 4 | 0.34 | ||
| Wear Rate | 0.4 - 2.0 | m/sec |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow 5(23 to 260°C) | 5.0E-5 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity 6 | 1.0E+15 | ohms | ASTM D257 |
| Volume Resistivity 7(23°C) | 1.0E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant 8(23°C, 1 MHz) | 5.10 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | Compression Molded |
| 2 . | Compression Molded |
| 3 . | Compression Molded |
| 4 . | Compression Molded |
| 5 . | Compression Molded |
| 6 . | Compression Molded |
| 7 . | Compression Molded |
| 8 . | Compression Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Primolac V620GP | Lucent Polymers, Inc. | ABS | Primolac |
| SABIC® PPcompound 7995 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| Nypol® PA A3 V20 CNZ0220 NR463 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| DINALON® A1V25-4111 | Grupo Repol | Nylon 66 | DINALON® |
| Fainplast PVC MGS 72/H | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
