Order Products : sales@su-jiao.com
Geon™ Vinyl Cellular E2600
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Cellular |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RFLZvo_GeonVinylCellularE2600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon E2600 exhibits comparable performance to Geon E2500 for single and twin screw extruders. |
| General Information | |
|---|---|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity 1 | 0.599 - 0.798 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 2 | 3380 | MPa | ASTM D638 |
| Tensile Strength 3(Yield) | 51.6 | MPa | ASTM D638 |
| Flexural Modulus | 3420 | MPa | ASTM D790 |
| Flexural Strength | 96.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact - Across Flow (23°C, 3.18 mm, Compression Molded) | 37 | J/m | ASTM D256A |
| Drop Impact Resistance | ASTM D4226 | ||
| 23°C 4 | 10.2 | J/cm | ASTM D4226 |
| 23°C 5 | 10.2 | J/cm | ASTM D4226 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.18 mm) | 70.0 | °C | ASTM D648 |
| CLTE - Flow | 5.9E-5 | cm/cm/°C | ASTM D696 |
| Additional Information |
|---|
| Physical properties measured on un-foamed profiles from Geon E2600 white. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Melt Temperature | 177 - 191 | °C |
| Note Message | |
|---|---|
| 1 . | Cellular |
| 2 . | Type 1, 5.1 mm/min |
| 3 . | Type 1, 5.1 mm/min |
| 4 . | Procedure A, C.125 Throwing |
| 5 . | Procedure B, C.125 Throwing |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXTEL® 600GF30 | MRC Polymers, Inc. | PP, Unspecified | MAXTEL® |
| Purac PLA Blend C | Purac | PLA | Purac PLA |
| TOTAL Polyethylene HDPE 2008 SN 60 | TOTAL Refining & Chemicals | HDPE | TOTAL Polyethylene |
| Bio-Flex® F 1138 | FKuR Kunststoff GmbH | PLA | Bio-Flex® |
| ESTAPROP H 0560 GFCTG | Cossa Polimeri S.r.l. | PP Homopolymer | ESTAPROP |
