Order Products : sales@su-jiao.com
Casico™ FR4820
| Category: | PE, Unspecified , Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Casico™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RF2me5_Casico-FR4820.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Casico FR4820 is a thermoplastic, low smoke zero halogen (LSZH) flame retardant, UV stabilised, natural insulation compound combining with excellent extrusion properties. It is based on the novel technology, Casico, containing inorganic filler and a novel char-forming additive which confer flame retardancy with very limited smoke generation. Casico FR4820 in combination meets the applicable requirements as below when processed using extrusion practice and testing procedure:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 1.15 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) 2(190°C/2.16 kg) | 0.90 | g/10 min | ISO 1133 |
| Water Absorption (70°C) 3 | 0.100 | mg/cm² | IEC 60811-1-3 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Cold Bend (-40°C) 4 | Pass | IEC 60811-1-4 | |
| Cold Impact (-40°C) 5 | Pass | IEC 60811-1-4 | |
| Temperature Index - Compound | 200 | °C | ISO 4589-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| NBS Smoke Density | |||
| -- 6 | 6.0 | min | |
| -- 7 | 49.0 | ||
| -- 8 | 20.0 | min | |
| -- 9 | 104 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Breakdown Duration 10 | Pass | IEC 60227-2/2.3 | |
| Breakdown Voltage 11 | 36000 | V | ISO 6722 |
| Cone Calorimeter | ISO 5660 | ||
| Average Heat Release 12 | 244 | kW/m² | |
| CO 13 | 0.230 | kg/m³ | |
| CO2 14 | 17.0 | kg/m³ | |
| Heat Cubustion 15 | 29.0 | ||
| Ignition time 16 | 2.1 | min | |
| Max Heat Release 17 | 400 | kW/m² | |
| Smoke Obscuration 18 | 520 | ||
| Corrosion - of Combustion Fumes 19 | 1.50 | µS/cm | IEC 60754-2 |
| Pressure Test (90°C) 20 | < 50 | % | IEC 60811-3-1 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness 21(Shore D, 15 sec) | 40 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 22(Yield) | 13.0 | MPa | ISO 527-2/50 |
| Tensile Strain 23(Break) | 550 | % | ISO 527-2 |
| Flexural Modulus 24 | 215 | MPa | ISO 178 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Stress | IEC 60811-1-2 | ||
| -- 25 | > -80 | % | |
| 100°C, 240 hr | > -80 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature 26 | < -60.0 | °C | ISO 974 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 27 | 1.0E+16 | ohms·cm | IEC 60093 |
| Electric Strength | 20 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index 28 | 27 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 180 | °C | |
| Cylinder Zone 4 Temp. | 190 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | Compound, ISO 1872-2 |
| 2 . | Compound |
| 3 . | 14 days, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 4 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 5 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 6 . | Time to Dmax, (76x76x0.7 mm plaque), Flaming mode |
| 7 . | Opitical smoke density Dmax, (76x76x0.7 mm plaque), Flaming mode |
| 8 . | Time to Dmax, (76x76x0.7 mm plaque), Non-flaming mode |
| 9 . | Opitical smoke density Dmax, (76x76x0.7 mm plaque), Non-flaming mode |
| 10 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 11 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 12 . | heat flux 35 kW/m2, 3 mm plaque |
| 13 . | heat flux 35 kW/m2, 3 mm plaque |
| 14 . | heat flux 35 kW/m2, 3 mm plaque |
| 15 . | heat flux 35 kW/m2, 3 mm plaque, MJ/dm3 |
| 16 . | heat flux 35 kW/m2, 3 mm plaque |
| 17 . | heat flux 35 kW/m2, 3 mm plaque |
| 18 . | heat flux 35 kW/m2, 3 mm plaque, m2/dm3 |
| 19 . | Compound, 5.6 |
| 20 . | at high temperature, 4 hrs, Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 21 . | Compound |
| 22 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 23 . | Cable (0.7 mm insulation over 1.5 mm² solid Cu) |
| 24 . | Compound |
| 25 . | After UV ageing |
| 26 . | Compound |
| 27 . | Compound |
| 28 . | Compound |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Allen ABS 556/LXS | SEKISUI Polymer Innovations, LLC | ABS | Allen ABS |
| Colorite 12 Series 1124 | Colorite Polymers | PVC, Unspecified | Colorite 12 Series |
| DINALEN® 55 | DIOKI d.d. | LDPE | DINALEN® |
| Elastron® G G400.A05.B | Elastron USA, Inc. | SEBS | Elastron® G |
| MAGNUM™ 3904 Smooth | Trinseo | ABS | MAGNUM™ |
