Order Products : sales@su-jiao.com
PRIMALLOY® B1600
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RCyXVT_PRIMALLOY-B1600.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® B1600 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® B1600: Low Hardness. |
| General Information | |
|---|---|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 0.90 | % | |
| Flow : 2.00 mm | 2.5 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 61 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 6.00 | MPa | ISO 37 |
| Tensile Elongation (Break) | 620 | % | ISO 37 |
| Tear Strength | 35 | kN/m | ISO 34-1 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren F320 (1st-grade) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Alpha PVC GW 2403-1-VW1 NAT LCF | AlphaGary | PVC, Unspecified | Alpha PVC |
| Armlen® PP TM 30.1 | Poly Plastic | PP, Unspecified | Armlen® |
| Paxon™ EA55-003 | ExxonMobil Chemical | HDPE, UHMW | Paxon™ |
| Perfactory® Clear Guide | EnvisionTEC, Inc. | Unspecified | Perfactory® |
