Order Products : sales@su-jiao.com

Edgetek™ PP-20GF/XC701 WHITE

Category:	PP, Unspecified , Polypropylene
Manufacturer:	PolyOne Corporation
Trademark:	Edgetek™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RCgT5z_Edgetek-PP-20GF-XC701-WHITE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.

Message

The Edgetek® Engineering Thermoplastic Compounds portfolio covers a broad range of standard and custom-formulated high performance materials. This portfolio includes high-temperature materials for elevated service temperature environments, high-modulus / structural materials for load-bearing and high-strength applications and flame-retardant products. These compounds are based on select engineering thermoplastic resins that are compounded with reinforcing additives such as carbon fiber, glass fiber and glass beads.

General Information
Filler / Reinforcement	Glass Fiber, 20% Filler by Weight
RoHS Compliance	RoHS Compliant
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.04	g/cm³	ASTM D792
Molding Shrinkage - Flow	0.30 to 0.50	%	ASTM D955

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Break)	50.3	MPa	ASTM D638
Tensile Elongation ²(Break)	4.0	%	ASTM D638
Flexural Modulus	2760	MPa	ASTM D790
Flexural Strength	65.5	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C, 6.35 mm, Injection Molded)	43	J/m	ASTM D256A

Injection	Nominal Value	Unit
Mold Temperature	26.7 to 48.9	°C

Extrusion	Nominal Value	Unit
Melt Temperature	216 to 238	°C

Note Message
1 .	Type I, 5.1 mm/min
2 .	Type I, 5.1 mm/min

Resin Grade	Manufacturer	Category	Trademark
Sylvin 5137-94 Natural	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
DINALON® PA 6.6 IGNÍFUGA 30% FV	Grupo Repol	Nylon 66	DINALON®
Generic PP, High Crystal - Talc	Generic	PP, High Crystal	Generic
Sylvin 83015-80FUV White 1576	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin
ALTECH® ABS A 1000/180	ALBIS PLASTIC GmbH	ABS	ALTECH® ABS