Order Products : sales@su-jiao.com
NEMCON H ABS DP116P
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | NEMCON H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R7Cq3q_NEMCON-H-ABS-DP116P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Nemcon H-series products are designed for use in high performance electronic assemblies where heat removal is critical to system performance. Nemcon H ABS DP116P is a thermally conductive, electrically insulating ABS compound, combining thermal conductivity with good HDT and processability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.66 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(23°C) | 3570 | MPa | ASTM D638 |
| Tensile Strength 2(Break, 23°C) | 32.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, 23°C) | 1.7 | % | ASTM D638 |
| Flexural Modulus 4(23°C, 50.0 mm Span) | 3190 | MPa | ASTM D790 |
| Flexural Strength 5(Break, 23°C, 50.0 mm Span) | 52.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 21 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm) | 81.0 | °C | ASTM D648 |
| Thermal Conductivity (23°C) | 0.70 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 8.0E+12 | ohms | ASTM D257 |
| Additional Information |
|---|
| The value listed as Thermal Conductivity, ASTM C177 was tested in accordance with ASTM E1461. |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxelast® P3655 | Nantong Polymax Elastomer Technology, Co., Ltd | TPE | Maxelast® |
| HIDEN® P301E BL | YUHWA Korea Petrochemical Ind. Co., Ltd. | HDPE | HIDEN® |
| HiFill® PPS 0334 A | Techmer Engineered Solutions | PPS | HiFill® |
| LARIPUR® LPR 9025 | COIM S.p.A. | TPU-Polyester | LARIPUR® |
| Plexiglas® V825-UVA5A | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
