Order Products : sales@su-jiao.com
Lupolen 1800 S
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Lupolen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R6taEh_Lupolen-1800-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lupolen 1800 S is a low density polyethylene (LDPE) resin used in injection molding and other processing methods. It exhibits high flowability, and good softness, toughness and dimensional stability. Lupolen 1800 S is delivered in pellet form and is not additivated. Lupolen 1800 S is used in applications such as toys, caps & closures, engineering parts, and sports and leisure equipment. Lupolen 1800 S is not intended for use in medical and pharmaceutical applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.917 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 20 | g/10 min | ISO 1133 |
| Spiral Flow | 65.0 | cm | Internal Method |
| Environmental Stress-Cracking Resistance 1 | 1.50 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 45 | ISO 868 | |
| Ball Indentation Hardness | 13.0 | MPa | ISO 2039-1 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 160 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 8.00 | MPa | ISO 527-2 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 80.0 | °C | ISO 306/A50 |
| Melting Temperature (DSC) | 106 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 to 230 | °C |
| Note Message | |
|---|---|
| 1 . | Tested in 10% nonionic surfactants |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 203 M 25 | RTP Company | Nylon 66 | RTP |
| RTP 200 A TFE 18 SI 2 | RTP Company | Nylon 6 | RTP |
| RTP 4009 MS | RTP Company | PPA | RTP |
| Badamid® PA612 GF30 | Bada AG | Nylon 612 | Badamid® |
| TABOREX® TA 1137 MD | SILON s.r.o. | MDPE | TABOREX® |
