Order Products : sales@su-jiao.com
Sasol Polymers PE LT019
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Sasol Polymers |
| Trademark: | Sasol Polymers PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R3gPIN_Sasol-Polymers-PE-LT019.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Features
Applications
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 21 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (100% Igepal CO-630, F50) | 0.0100 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 51 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | ASTM D638 | ||
| Yield | 10.0 | MPa | ASTM D638 |
| Fracture | 6.00 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 80 | % | ASTM D638 |
| Flexural Modulus | 336 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 130 - 170 | °C | |
| Middle Temperature | 140 - 180 | °C | |
| Front Temperature | 150 - 190 | °C | |
| Nozzle Temperature | 170 - 200 | °C | |
| Processing (Melt) Temp | 180 - 240 | °C |
| Injection instructions |
|---|
| Zone 4: 160 to 200°C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEREZ ABS/PC Blend 2000 | TER HELL PLASTIC GMBH | PC+ABS | TEREZ ABS/PC |
| FILLMA 5002F30B | POLYROCKS CHEMICAL CO., LTD | PP, Unspecified | FILLMA |
| EL-Lene™ H255JA | SCG Chemicals Co., Ltd. | HDPE | EL-Lene™ |
| LNP™ THERMOCOMP™ RF006ESZ compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| Makrolon® ET UV112 | Covestro - Polycarbonates | PC | Makrolon® |
