Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroplastic FEP 6338Z
| Category: | FEP , Perfluoroethylene Propylene Copolymer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroplastic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R2aMkH_3M-Dyneon-Fluoroplastic-FEP-6338Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Features Dyneon™ FEP 6338 Z Fluorothermoplastic was designed primarily for ultra-high-speed wire extrusion. Its distinguishing features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 2.15 | g/cm³ | ISO 12086 |
| Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 38 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, 23°C) | 20.0 | MPa | ISO 527-1 |
| Tensile Strain (Break, 23°C) | 300 | % | ISO 527-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 255 | °C | ISO 12086 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (0.250 mm) | 70 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.05 | ||
| 23°C, 9.40 GHz | 2.04 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 MHz | 5.0E-4 | ||
| 9.40 GHz | 3.0E-4 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | > 95 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAROLON 2500 | Taro Plast S.p.A. | PC | TAROLON |
| APEX® 90-A471R-75-NT | Teknor Apex Company | PVC, Flexible | APEX® |
| ENSOFT SD-150-45D | ENPLAST, a Ravago Group Company | TPE | ENSOFT |
| Iupilon® GPN2030DF | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| POFEX EP8004S150F | POLYROCKS CHEMICAL CO., LTD | XLPE | POFEX |
