Order Products : sales@su-jiao.com
NEOFLON™ AC-5539
| Category: | PFA , Perfluoroalkoxy |
| Manufacturer: | DAIKIN AMERICA, INC. |
| Trademark: | NEOFLON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | R2DSDA_NEOFLON-AC-5539.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NEOFLON Coating Powder is a high performance material made from fluoropolymer resin. Two kinds of NEOFLON Coating Powders, NEOFLON FEP, and PFA Coating Powder, are available. NEOFLON FEP Coating Powder is a fine powder made of tetrafluoroethylene and hexafluoropropylene copolymer and NEOFLON PFA Coating Powder is a fine powder made of tetrafluoroethylene and perfluoroalkylvinylether copolymer. NEOFLON FEP and PFA Coating Powder are low in melt viscosity and excellent in melt fluidity which can give a coating free of pinholes. NEOFLON FEP and PFA are ideal for use as corrosion resistant linings because of their excellent thermal and chemical resistance properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.12 to 2.17 | g/cm³ | ASTM D792 |
| Apparent Density | 0.45 to 0.65 | g/cm³ | JIS K6891 |
| Melt Mass-Flow Rate (MFR) (372°C/5.0 kg) | 1.0 to 7.0 | g/10 min | ASTM D3307 |
| Particle Size 1 | 20.0 to 60.0 | µm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Adhesion Strength - Peel Test 2 | 4.0 to 6.0 | kN/m | |
| Contact Angle 3 | |||
| Hexadecane | 65.0 | ° | |
| Water | 102 to 106 | ° |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 60 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 19.6 to 31.4 | MPa | JIS K6888 |
| Tensile Elongation (Break) | 250 to 350 | % | JIS K6888 |
| Coefficient of Friction (vs. Itself - Static) | 0.050 to 0.080 | Internal Method | |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 5.00 to 15.0 | mg |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 303 to 313 | °C | ASTM D3307 |
| Note Message | |
|---|---|
| 1 . | Laser Diffraction |
| 2 . | 1) steel substrate are roughened with 80 ~ 120 mesh sand2) applied two coat primer EK-1083G,EK-1883GB3) applied NEOFLON Coating Powder into 500 µm thickness. |
| 3 . | Goniometer |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PPcompound 95610CSU10 | Saudi Basic Industries Corporation (SABIC) | PP, Unspecified | SABIC® PPcompound |
| Tufpet PBT G2815 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| CABELEC® CA4701 | Cabot Corporation | PP Copolymer | CABELEC® |
| Cevian®-V V500DLG | PlastxWorld Inc. | ABS | Cevian®-V |
| KOPA® KN333G15BL | Kolon Plastics, Inc. | Nylon 66 | KOPA® |
