Order Products : sales@su-jiao.com
Franprene TGA 1165
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Franplast S.r.l. |
| Trademark: | Franprene |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qylmtl_Franprene-TGA-1165.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This compound is ideal for applications where high toughness and strength properties are required. High elastometric percentages guarantee good recovery, an important requirement for this kind of application. Application:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 30 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 4.50 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 650 | % | ISO 527-2 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 30 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Service Temperature | -30 to 70 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Time | 0.0 | hr | |
| Rear Temperature | 165 to 185 | °C | |
| Middle Temperature | 170 to 190 | °C | |
| Front Temperature | 175 to 195 | °C | |
| Nozzle Temperature | 180 to 200 | °C | |
| Mold Temperature | 30.0 to 40.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TO 421 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| Spartech Polycom PP7250 | Spartech Polycom | PP Copolymer | Spartech |
| XENOY™ 1731 resin | SABIC Innovative Plastics | PC+PBT | XENOY™ |
| Arnitel® PM381 | DSM Engineering Plastics | TPC-ET | Arnitel® |
| Iupital® F30-03 | Mitsubishi Engineering-Plastics Corp | Acetal (POM) Copolymer | Iupital® |
