Order Products : sales@su-jiao.com

VECTOR® 2518LD

Category:	SBS , Styrene Butadiene Styrene Block Copolymer
Manufacturer:	Dexco Polymers LP
Trademark:	VECTOR®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QygLGG_VECTOR-2518LD.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
VECTOR 2518LD Styrene-Butadiene-Styrene (SBS) Block Copolymer SBS(1) triblock copolymer. Contains <1% diblock copolymer. Medium styrene, high viscosity and high modulus copolymer. Outstanding thermal stability. Product form is a low density porous crumb, dusted with talc. VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information. VECTOR 2518LD styrene-butadiene-styrene block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite). It has excellent thermoplastic elastomer properties and outstanding physical strength. It is designed for use as an impact/toughness modifier in blends with styrenics and as an asphalt modifier to lower temperature susceptibility.

Message

VECTOR 2518LD
Styrene-Butadiene-Styrene (SBS) Block Copolymer

SBS(1) triblock copolymer.

Contains <1% diblock copolymer.

Medium styrene, high viscosity and high modulus copolymer.

Outstanding thermal stability.

Product form is a low density porous crumb, dusted with talc.

VECTOR styrenic block copolymers find use under certain regulations as articles or as ingredients in articles intended for food contact or medical applications. Please contact your Dexco Polymers agent for a detailed letter of certification or further information.

VECTOR 2518LD styrene-butadiene-styrene block copolymer is produced via proprietary sequential anionic polymerization technology from Dexco Polymers LP, a Dow/ExxonMobil Venture. It is formulated with the antioxidant TNPP (tris(nonylphenyl) phosphite).

It has excellent thermoplastic elastomer properties and outstanding physical strength. It is designed for use as an impact/toughness modifier in blends with styrenics and as an asphalt modifier to lower temperature susceptibility.

General Information
Additive	Antioxidant
Features	Antioxidant Copolymer Food Contact Acceptable Good Thermal Stability High Strength High Viscosity
Uses	Asphalt Modification Plastics Modification
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.938	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	0.60	g/10 min	ASTM D1238
Solution Viscosity	1200	mPa·s	ASTM D2196
Ash Content	5.0	wt%	ASTM D1416
Styrene Content	31.0	wt%	Internal Method

Additional Information	Nominal Value	Unit	Test Method
Diblock Content	< 1.0	wt%	Internal Method
Volatiles	0.3	wt%	Internal Method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A, 1 sec)	78		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(300% Strain, 25°C)	4.14	MPa	ASTM D412
Tensile Strength ²(Yield, 25°C)	30.3	MPa	ASTM D412
Tensile Elongation ³(Break, 25°C)	1000	%	ASTM D412

Note Message
1 .	25 Wt.% in toluene
2 .	25 Wt.% in toluene
3 .	25 Wt.% in toluene

Resin Grade	Manufacturer	Category	Trademark
MTEGRITY™ PP Impact Copolymer CP310	M. Holland Company	PP Impact Copolymer	MTEGRITY™ PP Impact Copolymer
Titalon® 1300GB	Titan Plastics Compounds Co., Ltd.	Nylon 6	Titalon®
Artenius XCEL L	Artenius	PETG	Artenius
Epoxies, Ect. 60-7114	Epoxies, Etc.	PUR, Unspecified	Epoxies, Ect.
Infino NH-1022	LOTTE ADVANCED MATERIALS CO., LTD.	PC+ABS	Infino