Order Products : sales@su-jiao.com
ICORENE® N2106
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | ICO Polymers EMEA, A Division of A. Schulman |
| Trademark: | ICORENE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QxDWrF_ICORENE-N2106.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ICORENE® N2106 is an easy flowing low density polyethylene grade with medium stiffness and good toughness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.924 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 44 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 200 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 120 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 89.0 | °C | ASTM D1525 |
| Peak Melting Temperature | 108 | °C | ASTM D3418 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MAXTEL® 600-BK | MRC Polymers, Inc. | PP, Unspecified | MAXTEL® |
| Sanren N220 (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | LDPE | Sanren |
| THERMOLAST® K TC7PAZ (Series: AD/PA) | KRAIBURG TPE | TPE | THERMOLAST® K |
| UMG ABS® VW802 | UMG ABS, Ltd. | ABS | UMG ABS® |
| Desmopan® DP 2792A | Covestro - PUR | TPU-Polyester | Desmopan® |
