Category: | PP, Unspecified , Polypropylene |
Manufacturer: | Azdel, Inc. |
Trademark: | SuperLite® |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | QwvW5F_SuperLite-SL551800-100-6-0mm-.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
AZDEL SuperLite SL551800-100 (6.0mm) is a low pressure, thermoformable, thermoplastic composite of polypropylene and long chopped glass fibers. Usually combined with outer layers as needed for the application (i.e.; adhesive films, barrier films, scrim, tough PP films, non-wovens, reinforcements or just the bare surface.) Typically used in non-structural applications where a very high strength to weight ratio is required, such as automotive headliners, door panels, package shelves, and other interior trim. |
General Information | |
---|---|
Filler / Reinforcement |
|
Appearance |
|
Forms |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 0.319 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow | < 0.020 | % | ASTM D955 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 2400 | MPa | ASTM D638 |
Tensile Strength | 17.0 | MPa | ASTM D638 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Instrumented Dart Impact | ASTM D3763 | ||
23°C, Energy at Peak Load | 8.60 | J | ASTM D3763 |
23°C, Total Energy | 15.7 | J | ASTM D3763 |
Additional Information |
---|
Multi-axial Impact Peak Force, ASTM D3763, 23°C: 1600 NMass per unit area, Internal Test Method: 1800 g/m²Flexual Strength, SAE J949: 8.5 MPaFlexual Modulus, SAE J949: 950 MPa |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
SatinFlo™ 90 | Vi-Chem Corporation | PVC, Flexible | SatinFlo™ |
TECHNYL® A 52G1 MX20 BLACK 61 | Solvay Engineering Plastics | Nylon 66 | TECHNYL® A |
Epoxies, Ect. 50-1952 | Epoxies, Etc. | Silicone | Epoxies, Ect. |
SQUARE® LIM1030-30A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
OTECH PVC OW132-UL Approved | OTECH Corporation | PVC, Unspecified | OTECH PVC |