Order Products : sales@su-jiao.com
Garaflex™ O 9949RA NATURAL
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qthi98_Garaflex-O-9949RA-NATURAL.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX O 9949RA IS A PBB, PBBE AND PBBO FREE, 105C DEGREE, FLAME RETARDED, OLEFINIC THERMOPLASTIC ELASTOMER INTENDED FOR FLAT RIBBON PRIMARY AND HEAT TRACING CABLE. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 - 1.19 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 56 - 62 | ASTM D2240 | |
| Shaw D, 15 seconds | 46 - 52 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 8.96 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 190 | % | ASTM D412 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 23°C, 1 MHz | 2.36 | ASTM D150 | |
| 23°C, 1.00 GHz | 2.45 | ASTM D150 | |
| Dissipation Factor | ASTM D150 | ||
| 23°C, 1 MHz | 5.0E-4 | ASTM D150 | |
| 23°C, 1.00 GHz | 1.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index (3.18 mm) | 29 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 166 | °C | |
| Cylinder Zone 2 Temp. | 188 | °C | |
| Cylinder Zone 3 Temp. | 193 | °C | |
| Cylinder Zone 4 Temp. | 199 | °C | |
| Cylinder Zone 5 Temp. | 204 | °C | |
| Adapter Temperature | 204 | °C | |
| Melt Temperature | 204 - 216 | °C | |
| Die Temperature | 204 | °C |
| Extrusion instructions |
|---|
| Screen Pack: 40/80 or 40/100 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| HFFR 2003 | Teknor Apex Company | Polyolefin, Unspecified | HFFR |
| KPOL-LDPE LD K-1.20/920 | KPOL Chem Co. | LDPE | KPOL-LDPE |
| KYOCERA KE-1000SV | KYOCERA Chemical Corporation | Epoxy | KYOCERA |
| Plaslube® PA6/6 04003 MB | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
| THERMOLAST® K TF8ADN (Series: FC/AD1/PS) | KRAIBURG TPE | TPE | THERMOLAST® K |
