Order Products : sales@su-jiao.com
VENYL UG298
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | AD majoris |
| Trademark: | VENYL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qt5yC2_VENYL-UG298.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VENYL UG298 is a polyamide 66 glass fibre reinforced with medium viscosity intended for injection moulding, which offers a low coefficient of friction. APPLICATIONS VENYL UG298 has been developed especially for very demanding applications in automotive industry and electrical parts. Products requiring excellent combination between thermal and mechanical properties. VENYL UG298 offers better lubricated and a lower coefficient of friction. VENYL UG298 is available in both black/grey. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.32 | g/cm³ | ISO 1183 |
| Molding Shrinkage | 0.50 to 0.80 | % | |
| Water Absorption (Equilibrium, 23°C, 50% RH) | 1.7 to 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 130 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7800 to 8200 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 2.5 to 3.5 | % | ISO 527-2 |
| Flexural Modulus | 7000 to 7400 | MPa | ISO 178 |
| Flexural Stress | 190 to 210 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 5.0 to 6.5 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 244 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 253 | °C | ISO 75-2/A |
| Melting Temperature (DSC) | 256 | °C | ISO 3146 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.60 mm) | HB | UL 94 | |
| Glow Wire Flammability Index (2.00 mm) | 750 | °C | IEC 60695-2-12 |
| Oxygen Index | 26 | % | ISO 4589-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 100 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 250 to 280 | °C | |
| Middle Temperature | 260 to 290 | °C | |
| Front Temperature | 280 to 290 | °C | |
| Nozzle Temperature | 265 to 290 | °C | |
| Mold Temperature | 90.0 to 120 | °C | |
| Injection Pressure | 85.0 to 110 | MPa | |
| Injection Rate | Fast | ||
| Holding Pressure | 50.0 to 70.0 | MPa | |
| Screw L/D Ratio | 15.0:1.0 to 20.0:1.0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BMN P40 D | Arkema | Nylon 11 | Rilsan® |
| SEETEC LLDPE UF313 | Lotte Chemical Corporation | LLDPE | SEETEC LLDPE |
| Gallonprene® GP520-7004 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| EL-Lene™ M735RW | SCG Chemicals Co., Ltd. | LLDPE | EL-Lene™ |
| Epoxies, Ect. 20-3302NCLV | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
