TUFLIN™ HSE-1003 NT 7 Datasheet,LLDPE,The Dow Chemical Company-SHANGHAI SUSHENG

Message
Industrial pallet wrap stretch film applications Premium film packaging applications Complies with U.S. FDA 21 CFR 177.1520 (c) 3.1a Consult the regulations for complete details. TUFLIN™ HSE-1003 NT 7 Linear Low Density Polyethylene Resin is an ethylene-hexene-1 copolymer designed for cast stretch film applications such as industrial pallet wrap. Films containing HSE-1003 offer outstanding puncture, toughness and load holding properties.

General Information
Agency Ratings	FDA 21 CFR 177.1520(c) 3.1a
Forms	Particle
Processing Method	cast film

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	2.5	g/10 min	ASTM D1238

Films	Nominal Value	Unit	Test Method
Film Puncture Energy			Internal method
20 µm	3.84	J	Internal method
51 µm	8.25	J	Internal method
Film Puncture Force			Internal method
20 µm	40.0	N	Internal method
51 µm	84.5	N	Internal method
Film Puncture Resistance			Internal method
20 µm	26.4	J/cm³	Internal method
51 µm	20.8	J/cm³	Internal method
Film strength			ASTM D882
MD : 20 µm	209	J/cm³	ASTM D882
MD : 51 µm	255	J/cm³	ASTM D882
TD : 20 µm	269	J/cm³	ASTM D882
TD : 51 µm	334	J/cm³	ASTM D882
secant modulus			ASTM D882
2% secant, MD : 20 µm	147	MPa	ASTM D882
2% secant, MD : 51 µm	142	MPa	ASTM D882
2% secant, TD : 20 µm	156	MPa	ASTM D882
2% secant, TD : 51 µm	142	MPa	ASTM D882
Tensile Strength			ASTM D882
MD : Yield, 20 µm	11.2	MPa	ASTM D882
MD : Yield, 51 µm	10.2	MPa	ASTM D882
TD : Yield, 20 µm	10.5	MPa	ASTM D882
TD : Yield, 51 µm	9.98	MPa	ASTM D882
MD : Break, 20 µm	49.8	MPa	ASTM D882
MD : Fracture, 51 µm	38.4	MPa	ASTM D882
TD : Break, 20 µm	36.1	MPa	ASTM D882
TD : Fracture, 51 µm	44.2	MPa	ASTM D882
Tensile Elongation			ASTM D882
MD : Break, 20 µm	520	%	ASTM D882
MD : Fracture, 51 µm	720	%	ASTM D882
TD : Break, 20 µm	830	%	ASTM D882
TD : Fracture, 51 µm	900	%	ASTM D882
Dart Drop Impact
20 µm	130	g	ASTM D1709A
20 µm	< 100	g	ASTM D1709B
51 µm	270	g	ASTM D1709A
51 µm	170	g	ASTM D1709B
Elmendorf Tear Strength ¹			ASTM D1922
MD : 20 µm	180	g	ASTM D1922
MD : 51 µm	780	g	ASTM D1922
TD : 20 µm	620	g	ASTM D1922
TD : 51 µm	1100	g	ASTM D1922
Unstretched bond			ASTM D5458
20.3 µm	210	g	ASTM D5458
50.8 µm	280	g	ASTM D5458
Final stretch ²			Internal method
20.3 µm	330	%	Internal method
50.8 µm	520	%	Internal method

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	98.9	°C	ASTM D1525
Melting Temperature (DSC)	124	°C	Internal method

Optical	Nominal Value	Unit	Test Method
Gloss			ASTM D2457
20°, 20.3 µm	156		ASTM D2457
20°, 50.8 µm	146		ASTM D2457
45°, 20.3 µm	95		ASTM D2457
45°, 50.8 µm	91		ASTM D2457
Haze			ASTM D1003
20.3 µm	1.0	%	ASTM D1003
50.8 µm	4.0	%	ASTM D1003

Extrusion	Nominal Value	Unit
Melt Temperature	274	°C

Extrusion instructions
铸造薄膜的制造条件： EGAN/Davis 标准 5 层铸造生产线熔体温度：525 °F (274 °C) 冷却辊（主/次）温度：70 °F (21 °C) 生产线速度：0.8 密尔 = 600 fpm（183 米/分）；2.0 密尔 = 200 fpm（61 米/分）输出：0.8 密尔 = 416 磅/小时；2.0 密尔 = 341 磅/小时模具宽度：36 英寸 (914 mm) 模具间隙：25 密尔 (0.65 mm) 气隙：3 英寸 (76 mm)

Extrusion instructions

铸造薄膜的制造条件： EGAN/Davis 标准 5 层铸造生产线熔体温度：525 °F (274 °C) 冷却辊（主/次）温度：70 °F (21 °C) 生产线速度：0.8 密尔 = 600 fpm（183 米/分）；2.0 密尔 = 200 fpm（61 米/分）输出：0.8 密尔 = 416 磅/小时；2.0 密尔 = 341 磅/小时模具宽度：36 英寸 (914 mm) 模具间隙：25 密尔 (0.65 mm) 气隙：3 英寸 (76 mm)

Note Message
1 .	Method B
2 .	Testing on pallets; highlighting Industries Inc. test methods.

Category:	LLDPE , Linear Low Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	TUFLIN™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QomiFM_TUFLIN-HSE-1003-NT-7.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
Teldene® H25FBA	National Petrochemical Industries Company (NATPET)	PP Homopolymer	Teldene®
SURPASS® RMs341-U(UG)	NOVA Chemicals	HDPE	SURPASS®
Monprene® IN-19147	Teknor Apex Company	TPE	Monprene®
4LOY® 10E27200	4Plas	PC+ABS	4LOY®
HOPELEN L-670M	Lotte Chemical Corporation	PP Homopolymer	HOPELEN