Europrene® N 2875 GRN

Category:	NBR , Acrylonitrile Butadiene Rubber
Manufacturer:	Versalis S.p.A.
Trademark:	Europrene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Qo1bUe_Europrene-N-2875-GRN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Europrene® N 2875 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process. Europrene® N 2875 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process. Foamed insulation tubes. Grade with faster cure rate compared to equivalent standard type. Suitable for injection applications (low mould fouling).

Message

Europrene® N 2875 GRN is an advanced technology cold polymerized acrylonitrile-butadiene copolymer made at the PortoTorres production facility in Italy. A non staining antioxidant is added during the production process.

Europrene® N 2875 GRN is characterised by excellent tear resistance at high temperature, excellent dimensional stability both in calendering and in extrusion. GRN grades show higher cure rate, higher low temperature flexibility, higher crosslinking density and better mechanical properties, better oil and fuel resistance in comparison to STD grades. The improved processability guarantees low mould fouling products and then long production runs, lower mould wear and less production controls.The vulcanization can be performed by sulphur based systems or by peroxides. The low temperature properties can be improved by adding polar plasticizers as synthetic esters of adipic, sebacic or phtalic acids. To improve heat, light and ozone resistance, suitable protective agents as amine or phenolic antioxidants have to be added in the compounding process.

Foamed insulation tubes. Grade with faster cure rate compared to equivalent standard type. Suitable for injection applications (low mould fouling).

General Information
Additive	Antioxidant
Features	Antioxidant Fast Cure Fuel Resistant Good Dimensional Stability Good Tear Strength Low Temperature Flexibility Oil Resistant
Appearance	Yellow
Forms	Bale
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Mooney Viscosity (ML 1+4, 100°C)	75	MU	ASTM D1646
Acrylonitrile Content	28.0	wt%	ASTM D3533
Ash Content	< 0.5	wt%	ASTM D5667
Organic Acid	< 0.5	wt%	ASTM D5774
Soap	< 0.6	wt%	ASTM D5774
Volatile Matter	< 0.70	wt%	ASTM D5668

Resin Grade	Manufacturer	Category	Trademark
Xuchuan XCW-SP30	Xuchuan Chemical (Suzhou) Co., Ltd	PUR, Unspecified	Xuchuan
NuSil MED-4755	NuSil Technology	Rubber	NuSil
Axiall PVC 11863	Axiall Corporation	PVC, Flexible	Axiall PVC
Indothene HD 52GB002	Reliance Industries Limited	HDPE	Indothene HD
Plaslube® PA6/6 CF33 ML2 BK	Techmer Engineered Solutions	Nylon 66	Plaslube®