Order Products : sales@su-jiao.com

Osterlene® PPH-38-.5

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	Osterman & Company
Trademark:	Osterlene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	QnDuP5_Osterlene-PPH-38--5.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
PPH-38-.5 is a polypropylene homopolymer for use in filtration applications. PPH-38-.5 is a controlled rheology resin that provides good flow characteristics while retaining the mechanical strength of a low melt flow rate resin. Typical applications include melt blown fiber or fine denier fiber production. PPH-38-.5 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply.

Message

PPH-38-.5 is a polypropylene homopolymer for use in filtration applications.
PPH-38-.5 is a controlled rheology resin that provides good flow characteristics while retaining the mechanical strength of a low melt flow rate resin.
Typical applications include melt blown fiber or fine denier fiber production.
PPH-38-.5 meets the requirements of the Food and Drug Administration regulation 21 CFR 177.1520. This regulation allows the use of this olefin polymer in "...articles or components of articles intended for use in contact with food." Specific limitations or conditions of use may apply.

General Information
Features	Controlled Rheology Food Contact Acceptable Good Flow Good Strength Homopolymer
Uses	Fibers Filtration Media Non-specific Food Applications
Agency Ratings	FDA 21 CFR 177.1520
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	38	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	106		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	36.4	MPa	ASTM D638
Tensile Elongation (Yield)	6.6	%	ASTM D638
Flexural Modulus	1650	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	27	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	98.3	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
SIBUR Synthetic Rubber SBR-1500 Grade C	SIBUR, LLC	SBR, Unspecified	SIBUR Synthetic Rubber
Ad-Tech Epoxy EA-618	Ad-Tech Plastic Systems Corp.	Epoxy	Ad-Tech Epoxy
Andur 8000 AP/Curene® 442	Anderson Development Company	PUR-Ether/TDI	Andur
EPIMIX PBT/PET GFU 30 NC	EPSAN Plastik SAN. ve TiC. A.S.	PBT+PET	EPIMIX
TOTAL Polystyrene Crystal 585B	TOTAL Refining & Chemicals	PS (GPPS)	TOTAL Polystyrene