Order Products : sales@su-jiao.com
FRAGOM PR/04 AFKK
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | FRAGOM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qm112T_FRAGOM-PR-04-AFKK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
FRAGOM : is our thermoplastic compound low flame propagation in fire conditions PVC free and heavy-metal free. FRAGOM PR/04 AFKK : it is studied to extrude insulation at high speed,compound without migration risks (plasticizers-free). Meet NORMA AS.NZL 3808.2000 Insulation Type HFI-75-TP,HFI-90-TP,HFI-110-TP Sheathing Type HFS-75-TP,HFS-90-TP,HFS-110-TP Certify : CEI2011 M1,VDE0207HM4(K=0,7),BS7655 LTS 3-4 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.40 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (160°C/21.6 kg) | 8.0 | g/10 min | ASTM D1238 |
| Water absorption rate- 24 hr (100°C) | 18.0 | g/m² | IEC 60811 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot pressing test- 6 h at 90°C-Penetration | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Halogen Content | 0 | % | IEC 60754-1 |
| Temperature Index (Combustion) 1 | > 300 | °C | NES 715 |
| Corrosive gases in flue gas- pH | > 4.50 | IEC 60754-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 185 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 55 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | > 11.0 | MPa | IEC 60811 |
| Tensile Strain (Break) | > 170 | % | IEC 60811 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (110°C, 168 hr) | 8.0 | % | IEC 60811 |
| Change in Tensile Strain at Break in Air (110°C, 168 hr) | -7.0 | % | IEC 60811 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 30 | % | ASTM D2863 |
| Additional Information |
|---|
| No detrimental effects on properties and capability of FRAGOM in presence of convenient Masterbatch colours, black included. We suggest to dry masterbatch before using. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 130 | °C | |
| Cylinder Zone 2 Temp. | 145 | °C | |
| Cylinder Zone 3 Temp. | 160 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | 21% O2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong Aobang TPU-Polyester 72-D | Shandong Aobang Chemical Technology Co.,Ltd. | TPU-Polyester | Shandong Aobang TPU-Polyester |
| TEREZ PA 6.6 7510 GF30 | TER HELL PLASTIC GMBH | Nylon 66 | TEREZ PA 6.6 |
| ACCUTECH™ CP0436G30CL | ACLO Compounders Inc. | PP Copolymer | ACCUTECH™ |
| ASTALAC™ ABS TX52 | Marplex Australia Pty. Ltd. | ABS | ASTALAC™ |
| Daelim Po1y® LH210 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
