Order Products : sales@su-jiao.com
UNISOFT ADHESION™ AD-40A-NT-1-05
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT ADHESION™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qm0zEg_UNISOFT-ADHESION-AD-40A-NT-1-05.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer Special bonding grade to PC/ABS, PC/PBT, PC, ABS, PBT and PET Unisoft Adhesion™ AD-40A-NT-1-05 is an adhesion grade intended for use in injection molding. Typically this material is used for 2-component overmolding applications, such as handles or sealings. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 0.80 - 2.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 40 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 2.07 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 400 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 65.6 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 199 - 210 | °C | |
| Front Temperature | 218 - 229 | °C | |
| Nozzle Temperature | 235 - 257 | °C | |
| Mold Temperature | 40.6 - 65.6 | °C |
| Injection instructions |
|---|
| Temperatures are shown for PC/ABS adhesion. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 9912 | Colorite Polymers | PVC, Flexible | Unichem |
| Aurora PVC AP2000 Series 050902 | Aurora Plastics, Inc. | PVC, Unspecified | Aurora PVC |
| Kumho ABS 730 | Korea Kumho Petrochemical Co., Ltd. | ABS | Kumho ABS |
| Latimass 37 B01-01 D025 | LATI S.p.A. | PLA | Latimass |
| ISOTHANE® 3055A | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyether | ISOTHANE® |
