Order Products : sales@su-jiao.com
Shin-Etsu Elastomer KE-2095-40A/B
| Category: | Silicone Rubber, HTV , Silicone Rubber, HTV |
| Manufacturer: | Shin-Etsu Silicones of America |
| Trademark: | Shin-Etsu Elastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QlGl8z_Shin-Etsu-Elastomer-KE-2095-40A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Shin-Etsu KE-2095-40 is a selective self-adhesive liquid injection molding silicone. It is supplied as two components which are mixed in a 1:1 ratio to ensure easy and accurate blending. The viscosity of KE-2095-40 is low enough to allow easy pumping through most injection molding systems.
|
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.11 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | 42 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 8.10 | MPa | |
| Tensile Elongation (Break) | 480 | % | |
| Tear Strength 1 | 29.1 | kN/m | |
| Compression Set (180°C, 22 hr) | 6.0 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life (32°C) | 26 | wk |
| Additional Information |
|---|
| Press / Post Cure: Press |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time | 0.17 | hr |
| Note Message | |
|---|---|
| 1 . | B mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® FU1007 | Covestro - Polycarbonates | PC | Makrolon® |
| Sipolprene® 63210 | SIPOL S.p.A | TPC-ET | Sipolprene® |
| SUMIKASUPER® LCP E4008 | Sumitomo Chemical Co., Ltd. | LCP | SUMIKASUPER® LCP |
| Absolac® 450H | Styrolution | ABS | Absolac® |
| Plaslube® PC / ABS 1950 | Techmer Engineered Solutions | PC+ABS | Plaslube® |
