Order Products : sales@su-jiao.com
Fluon® LM-ETFE 730AP
| Category: | ETFE , Ethylene Tetrafluoroethylene Copolymer |
| Manufacturer: | Asahi Glass Co., Ltd. |
| Trademark: | Fluon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QifuPG_Fluon-LM-ETFE-730AP.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Fluon®LM-ETFE is a new fluororesin which combines the excellent heat resistant and mechanical properties of ETFE resin and the low melting point. Features:
|
| General Information | |
|---|---|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.78 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (297°C/5.0 kg) | 20 to 30 | g/10 min | ASTM D3159 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 40.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 400 | % | ASTM D638 |
| Flexural Modulus | 647 | MPa | ASTM D790 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Retention of Tensile Elongation | 120 | % | ASTM D638 |
| Retention of Tensile Strength | 88 | % | ASTM D638 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Weight Loss on Heating - 10% | 410 | °C | TGA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 225 | °C | DSC |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant | ASTM D150 | ||
| 1 kHz | 2.40 | ||
| 1 MHz | 2.40 | ||
| Dissipation Factor | ASTM D150 | ||
| 1 kHz | 7.0E-4 | ||
| 1 MHz | 8.2E-3 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 | |
| Oxygen Index | 40 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Network Polymers SAN 330 | Network Polymers, Inc. | SAN | Network Polymers SAN |
| Braskem PP C7054-07NA | Braskem America Inc. | PP Impact Copolymer | Braskem PP |
| Jampilen EP448T | Jam Polypropylene Company | PP Copolymer | Jampilen |
| OmniTech™ PBT TF23 PG | OMNI Plastics, LLC | PBT | OmniTech™ |
| PENTAMID L GV30 H RC schwarz | PENTAC Polymer GmbH | Nylon 12 | PENTAMID L |
