Order Products : sales@su-jiao.com
POLYNIL® T40
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | Nilit Plastics |
| Trademark: | POLYNIL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QgvP73_POLYNIL-T40.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYNIL® T40 is an unreiforced semi dull Polyamide 66 (Nylon 66) for fiber spinning. This 2.5 viscosity Polyamide 66 resin is FDA compliant. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.14 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| 23°C, 24 hr | 1.5 | % | |
| Saturation, 23°C | 8.5 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 225 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 85.0 | °C | ISO 75-2/A |
| Continuous Use Temperature 1 | 85.0 | °C | IEC 60216 |
| Vicat Softening Temperature | 240 | °C | ISO 306/B |
| Melting Temperature | 258 | °C |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 28 | % | ISO 4589-2 |
| Note Message | |
|---|---|
| 1 . | 20000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Mylar® J (390 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Arnite® T06 200 SNF | DSM Engineering Plastics | PBT | Arnite® |
| Fluon® PTFE RA3540 | Asahi Glass Co., Ltd. | PTFE | Fluon® |
| Grilamid® L 25 LM | EMS-GRIVORY | Nylon 12 | Grilamid® |
| Jackdaw PLA HW10NT6624 | Jackdaw Polymers | PLA | Jackdaw PLA |
