Order Products : sales@su-jiao.com
PRIMALLOY® B1920
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Mitsubishi Chemical Performance Polymers, Inc. |
| Trademark: | PRIMALLOY® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QgnYxK_PRIMALLOY-B1920.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRIMALLOY® B1920 is a Thermoplastic Elastomer (TPE) material. It is available in Asia Pacific, Europe, or North America. Primary attribute of PRIMALLOY® B1920: Flame Rated. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 28 | g/10 min | ISO 1133 |
| Molding Shrinkage 1 | Internal Method | ||
| Across Flow : 2.00 mm | 1.3 | % | |
| Flow : 2.00 mm | 1.4 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 47 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break) | 38.0 | MPa | ISO 527-2 |
| Nominal Tensile Strain at Break | 820 | % | ISO 527-2 |
| Flexural Modulus | 180 | MPa | ISO 178 |
| Flexural Stress | 9.50 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength | 120 | kN/m | ISO 34-1 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 179 | °C | JIS K7206 2 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Note Message | |
|---|---|
| 1 . | 120x120x2 mm test plaque |
| 2 . | 50°C/h, A (10N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE F0863 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| Udel® P-3500 LCD MB | Solvay Specialty Polymers | PSU | Udel® |
| NYCOA Polyamide 2038 | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| LNP™ STAT-KON™ EX01696C compound | SABIC Innovative Plastics | PEI | LNP™ STAT-KON™ |
| MAXAMID™ PA6G30-NC010 | Pier One Polymers, Inc. | Nylon 6 | MAXAMID™ |
