Order Products : sales@su-jiao.com
PMC® 746
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Smooth-On, Inc |
| Trademark: | PMC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QgZq37_PMC-746.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
PMC®-746 was developed to make molds for casting gypsum plasters. Like PMC®-744, this product is well suited for use as a rubber case mold - especially large case molds where extra rigidity is required. Shore hardness is 60 A. Because of its durability and moisture resistant properties PMC®-746 is also used by zoos and museums for a variety of mold-making, display and exhibit applications. It features a convenient mix ratio (2:1 by weight or volume), and contains no mercury. Other applications include making plaster block molds, reproducing ornamental plaster (architectural restoration), pre-cast concrete molds, casting waxes, Smooth-On rigid polyurethanes and epoxies and also for making a variety of special effects for movies and theatre. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.03 | g/cm³ | ASTM D1475 |
| Specific Volume | 0.972 | cm³/g |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Mixing Ratio | 2A:1B by weight |
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage - Flow | < 0.10 | % | ASTM D2566 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 1.52 | MPa | ASTM D412 |
| Tensile Strength (Break) | 4.83 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 650 | % | ASTM D412 |
| Tear Strength 1 | 17.5 | kN/m | ASTM D624 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Pot Life (23°C) | 15 | min | ASTM D2471 |
| Thermoset Mix Viscosity | 1200 | cP | ASTM D2393 |
| Demold Time (23°C) | 960 | min |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Fainplast PVC PHS 75/B | Fainplast Compounds S.r.l | PVC, Flexible | Fainplast PVC |
| ELASTOSIL® R plus 4020/60 | Wacker Chemie AG | Silicone | ELASTOSIL® R plus |
| HiFill FR® ABS FR | Techmer Engineered Solutions | ABS | HiFill FR® |
| OP - PC - Unfilled 68 | Oxford Polymers | PC | OP - PC - Unfilled |
| MARPOL® HDM 504-RC | Marco Polo International, Inc. | HDPE | MARPOL® |
