Order Products : sales@su-jiao.com
Forflex® 71G001D62
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | SO.F.TER. SPA |
| Trademark: | Forflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QfU1Ts_Forflex-71G001D62.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Forflex® 71G001D62 is a Thermoplastic Polyolefin Elastomer (TPO (POE)) material. It is available in Europe, Latin America, or North America for injection molding. Primary attribute of Forflex® 71G001D62: REACH Compliant. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, 15 sec) | 61 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 1 | 120 | kN/m | ASTM D624 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 170 | °C | |
| Middle Temperature | 190 | °C | |
| Front Temperature | 200 | °C | |
| Nozzle Temperature | 210 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shinko-Lac® ASA E510 | Mitsubishi Rayon America Inc. | ASA | Shinko-Lac® |
| Moplen D50S | Shazand (Arak) Petrochemical Corporation | PP Homopolymer | Moplen |
| ALTECH® PA66 A 2030/500 GF30 | ALBIS PLASTIC GmbH | Nylon 66 | ALTECH® PA66 |
| Jampilen EP448S | Jam Polypropylene Company | PP Copolymer | Jampilen |
| Deprene 101-64 | Shanghai Lin Gen Rubber Materials Co., Ltd. | PP+EPDM | Deprene |
