Order Products : sales@su-jiao.com
KMI PP KM-078IB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | KMI Group, Inc. |
| Trademark: | KMI PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Qf8Hd1_KMIPPKM078IB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
KM-078IB is a high flow impact copolymer for injection molding applications. It has excellent processability and stiffness-impact strength balance. It can be used for injection molding for large-size applications due to its high flowability and as a base resin for PP composite material that is applicable to automobile exterior and interior parts. Food Contact Application: KM-078IB meets the FDA requirements in the Code of Federal Regulations in CFR 177.1520 for food contact. Characteristics:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.910 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 40 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 95 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 30.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 55 | % | ASTM D638 |
| Flexural Modulus | 1570 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (23°C) | 64 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Distortion | 125 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Addisil™ 460 E | Momentive Performance Materials Inc. | Rubber | Addisil™ |
| Chemical Resources GPPS300 | Chemical Resources, Inc. | PS (GPPS) | Chemical Resources |
| DOMAMID® 6G50AFHUV | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
| EPS Silver® SF400R | INEOS Styrenics International SA | PS (EPS) | EPS Silver® |
| Integra™ POK 9360 GA4 LA1 | PolySource, LLC | PK | Integra™ |
